Wetting and Drying Kinetics of Building Materials

Abstract

Moisture is one of the most deteriorating factors of buildings. The moisture content depends on hygroscopic equilibrium between buildings materials and environment, which is determined by the drying and wetting rate of masonry. So, the moisture content is not only determined by the water that is absorbed by the material, but also by the amount of water that is evaporated under favourable conditions, which is described by the drying process. This work presents the results of an experimental evaluation of the drying kinetics, considering both surface and bulk moisture transfer. Two different specimens were used: External Thermal Insulation Composite Systems (ETICS) to study surface moisture transfer and solid brick to analyse the bulk moisture transfer. For both samples the drying kinetics was assessed considering different environment conditions (air temperature and humidity). Six different first-order kinetics models, available in the literature, were adjusted to describe the drying process and estimate the equilibrium moisture content of ETICS and solid red brick samples. The results point that Hii et al. and Midilli models allow the best fit and that the drying time constant is strongly affected by the moisture transfer phenomenon (at surface or bulk) and by the drying air conditions. It was also estimated the apparent molecular diffusion coefficient for solid red brick samples and its variation with temperature. (c) Springer International Publishing Switzerland 2014.