Please use this identifier to cite or link to this item: http://hdl.handle.net/10216/56021
Author(s): L. M. Durão
Daniel J. S. Gonçalves
João Manuel R. S. Tavares
Victor H. C. de Albuquerque
Túlio H Panzera
Leandro J. Silva
A. A. Vieira
A. M. Baptista
Title: Drilling delamination outcomes on glass and sisal reinforced plastics
Issue Date: 2013
Abstract: Nowadays, fibre reinforced plastics are used in a wide variety of applications. Apart from the most known reinforcement fibres, like glass or carbon, natural fibres can be seen as an economical alternative. However, some mistrust is yet limiting the use of such materials, being one of the main reasons the inconsistency normally found in their mechanical properties. It should be noticed that these materials are more used for their low density than for their high stiffness. In this work, two different types of reinforced plates were compared: glass reinforced epoxy plate and sisal reinforced epoxy plate. For material characterization purposes, tensile and flexural tests were carried out. Main properties of both materials, like elastic modulus, tensile strength or flexural modulus, are presented and compared with reference values. Afterwards, plates were drilled under two different feed rates: low and high, with two diverse tools: twist and brad type drill, while cutting speed was kept constant. Thrust forces during drilling were monitored. Then, delamination area around the hole was assessed by using digital images that were processed using a computational platform previously developed. Finally, drilled plates were mechanically tested for bearing and open-hole resistance. Results were compared and correlated with the measured delamination. Conclusions contribute to the understanding of natural fibres reinforced plastics as a substitute to glass fibres reinforced plastics, helping on cost reductions without compromising reliability, as well as the consequence of delamination on mechanical resistance of this type of composites.
Subject: Processamento de imagem, Engenharia dos materiais
URI: http://hdl.handle.net/10216/56021
Source: ADVANCED MATERIALS FORUM VI, PTS 1 AND 2
Document Type: Artigo em Livro de Atas de Conferência Internacional
Rights: openAccess
License: https://creativecommons.org/licenses/by-nc/4.0/
Appears in Collections:FEUP - Artigo em Livro de Atas de Conferência Internacional

Files in This Item:
File Description SizeFormat 
61934.pdfArtigo404.54 kBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons