Please use this identifier to cite or link to this item: https://hdl.handle.net/10216/401
Author(s): António T. Marques
Luís M. Durão
António G. Magalhães
João M. Tavares
Title: Delamination Analysis of Carbon Fibre Reinforced Laminates
Issue Date: 2007
Abstract: Drilling of carbon/epoxy laminates is normally carried out using standard drills, like twist or Brad drills. However, it is necessary to bear in mind the need to adapt the processes and/or tooling as the risk of delamination, or other damages, is high. These problems can affect the mechanical properties of the produced parts, hence, lower reliability. Production of higher quality holes, with damage minimization, is a challenge to everyone related with composites industry.In this paper, four different drills are compared in terms of thrust force during drilling and delamination caused by this machining operation. In order to evaluate delamination damage, enhanced radiography is applied. The resulting images were then processed using a previously developed image analysis and processing platform. Results show that a correct choice of drill geometry, cutting speed or feed rate can reduce delamination.
Subject: Engenharia
Engineering
URI: https://repositorio-aberto.up.pt/handle/10216/401
Source: ICCM-16 - 16th International Conference on Composite Materials
Document Type: Artigo em Livro de Atas de Conferência Internacional
Rights: restrictedAccess
License: https://creativecommons.org/licenses/by-nc/4.0/
Appears in Collections:FEUP - Artigo em Livro de Atas de Conferência Internacional

Files in This Item:
File Description SizeFormat 
56099.pdf
  Restricted Access
516.6 kBAdobe PDF    Request a copy from the Author(s)


This item is licensed under a Creative Commons License Creative Commons