Utilize este identificador para referenciar este registo: https://hdl.handle.net/10216/129597
Registo completo
Campo DCValorIdioma
dc.creatorAna Sofia Guimarães
dc.creatorNuno Ramos
dc.creatorChi Feng
dc.creatorLixin Sun
dc.creatorDariusz Gawin
dc.creatorPiotr Konca
dc.creatorJianhua Zhao
dc.creatorJohn Grunewald
dc.creatorKurt Kielsgaard Hansen
dc.creatorChristopher Hall
dc.creatorMaria Fredriksson
dc.creatorZbyšek Pavlík
dc.date.accessioned2022-09-09T04:48:16Z-
dc.date.available2022-09-09T04:48:16Z-
dc.date.issued2019
dc.identifier.othersigarra:354567
dc.identifier.urihttps://hdl.handle.net/10216/129597-
dc.description.abstractThe reliable determination of the hygric properties of porous building materials is important. In earlier round robin campaigns large discrepancies of measured hygric properties were found among different labs. Later studies indicated that differences in lab conditions and more importantly, personnel's operation procedures and data processing methods, might have the greatest impact. To gain further insight, a new round robin campaign has been launched by KU Leuven (Belgium), to which another eight institutes contributed. A relatively stable and homogeneous ceramic brick is tested, and 3 standard tests are performed: the vacuum saturation test, the capillary absorption test and the cup test. During the campaign, two rounds of measurements are performed. In the 1st round, tests are performed according to participants' respective experimental protocols. Next, a strict and detailed common protocol is prescribed. This paper reports on the results obtained in the 1st round of measurements. Results show that not much progress has been made since the EC HAMSTAD project: the vacuum saturation test leads to the most consistent results, while the cup test produces the largest discrepancies, most probably originating from sample sealing and humidity control.
dc.language.isoeng
dc.relation.ispartof4TH CENTRAL EUROPEAN SYMPOSIUM ON BUILDING PHYSICS (CESBP 2019)
dc.rightsrestrictedAccess
dc.titleA round robin campaign on the hygric properties of porous building materials
dc.typeArtigo em Livro de Atas de Conferência Internacional
dc.contributor.uportoFaculdade de Engenharia
dc.identifier.doi10.1051/matecconf/201928202011
dc.identifier.authenticusP-00S-MD7
Aparece nas coleções:FEUP - Artigo em Livro de Atas de Conferência Internacional

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
354567.pdf
  Restricted Access
artigo2.03 MBAdobe PDFVer/Abrir


Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.