Please use this identifier to cite or link to this item: https://hdl.handle.net/10216/98542
Full metadata record
DC FieldValueLanguage
dc.creatorR. M. Guedes
dc.creatorAlcides Sá
dc.date.accessioned2022-09-12T04:36:49Z-
dc.date.available2022-09-12T04:36:49Z-
dc.date.issued2008
dc.identifier.issn0263-8223
dc.identifier.othersigarra:56732
dc.identifier.urihttps://hdl.handle.net/10216/98542-
dc.description.abstractThe experimental methodology to test curved panels under three-point bend (3PB) load is assessed. The problem arises when mechanical and strength characterization of pipe material systems is required. Test specimens cut out from pipe samples oriented in the tangential direction were used to measure hoop modulus and strength. In this procedure singly curved beams with the same radius as the pipe are obtained. The present assessment was made using three different approaches: Finite Element Method (FEM) with nonlinear geometrical analysis, curved beam theory and an approximate 2D elasticity solution. It was verified that for some cases the nonlinear effect becomes important. Furthermore the maximum span achievable, which is limited by the specimen's geometry, can prevent the use of appropriate span/thickness ratios to avoid significant shear effects. However it was concluded that for typical GRP shell panels, with internal radius between 150 and 250 mm and a wall thickness of 12 mm. the 3PB tests display an almost linear relationship between applied load and maximum deflection. Moreover, reasonable accurate results, with an error lower than 5%, can be expected using the curved beam theory formulas. Finally some preliminarily experimental results are presented for the 250 mm radius beams with a thickness of 12 mm.
dc.language.isoeng
dc.rightsrestrictedAccess
dc.subjectEngenharia dos materiais
dc.subjectMaterials engineering
dc.titleNumerical analysis of singly curved shallow composite panels under three-point bend load
dc.typeArtigo em Revista Científica Internacional
dc.contributor.uportoFaculdade de Engenharia
dc.identifier.doi10.1016/j.compstruct.2007.04.005
dc.identifier.authenticusP-004-0B6
dc.subject.fosCiências da engenharia e tecnologias::Engenharia dos materiais
dc.subject.fosEngineering and technology::Materials engineering
Appears in Collections:FEUP - Artigo em Revista Científica Internacional

Files in This Item:
File Description SizeFormat 
56732.pdf
  Restricted Access
220.38 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.