Please use this identifier to cite or link to this item: http://hdl.handle.net/10216/98217
Author(s): Luís M. P. Durão
Daniel J. S. Gonçalves
João Manuel R. S. Tavares
Victor Hugo C. Albuquerque
A. Torres Marques
A. M. Baptista
Title: Drilling of carbon fibre reinforced laminates - a comparative analysis of five different drills on thrust force, roughness and delamination
Issue Date: 2010
Abstract: The distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in the increase of their use during the last decades. Although parts are normally produced to "near-net" shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most serious kind of damage as it can reduce the load carrying capacity of the joint. A proper choice of tool and cutting parameters can reduce delamination substantially. In this work, the results obtained with five different tool geometries are compared. Conclusions show that the choice of adequate drill geometry can reduce the thrust forces and consequently, the delamination damage.
Subject: Ciências Tecnológicas, Ciências da engenharia e tecnologias
Technological sciences, Engineering and technology
Call Number: 67523
URI: http://hdl.handle.net/10216/98217
Document Type: Artigo em Revista Científica Internacional
Rights: restrictedAccess
Appears in Collections:FEUP - Artigo em Revista Científica Internacional

Files in This Item:
File Description SizeFormat 
67523.pdfPaper318.74 kBAdobe PDF    Request a copy
67523.1.pdf735.15 kBAdobe PDF    Request a copy


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.