Utilize este identificador para referenciar este registo: https://hdl.handle.net/10216/173967
Registo completo
Campo DCValorIdioma
dc.creatorSofia Pessoa
dc.creatorSandra Lucas
dc.creatorNuno Simões
dc.creatorAna Sofia Guimarães
dc.date.accessioned2026-10-24T01:39:30Z-
dc.date.available2026-10-24T01:39:30Z-
dc.date.issued2025
dc.identifier.issn0950-0618
dc.identifier.othersigarra:770696
dc.identifier.urihttps://hdl.handle.net/10216/173967-
dc.description.abstractAs the construction industry explores new technologies, particularly automated methods, the thermal performance of 3D-printed concrete walls remains under-researched. This paper presents a study combining experimental tests and numerical simulations to evaluate the thermal behaviour of a multilayer wall system designed for 3D printing (3DP). The wall consists of two outer cement-based layers, commonly used in 3DP constructions, with an inner layer of thermal mortar for insulation. To assess its effective performance, a large-scale prototype wall was 3D-printed, and thermal tests were conducted in a hot box under both steady-state and dynamic conditions. Additional tests were performed after humidifying the thermal mortar to better understand the moisture impact. Numerical simulations were carried out using WUFI 2D to model transient heat transfer, and these results were validated against experimental measurements of temperature and heat flux. After the model was validated, the study extended to a sensitivity analysis of the insulation's thermal properties and the comparative simulation of seven additional wall configurations to evaluate the impact of insulation thickness, insulation positioning, and the inclusion of an air space on the thermal response. The wall's U-value in standard conditioning conditions was 0.746 W/(m2 & sdot;degrees C). The numerical model showed good agreement with experimental data. Introducing an air gap had a more significant effect on thermal performance than the insulation's position, with thinner insulation correlating with greater temperature fluctuations.
dc.language.isoeng
dc.rightsrestrictedAccess
dc.titleHeat transfer in a 3D-printed multilayer wall system: An experimental and numerical analysis
dc.typeArtigo em Revista Científica Internacional
dc.contributor.uportoFaculdade de Engenharia
dc.identifier.doi10.1016/j.conbuildmat.2025.142523
dc.identifier.authenticusP-019-K78
Aparece nas coleções:FEUP - Artigo em Revista Científica Internacional

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
770696.pdf
  Restricted Access
CBM_Heat transfer in a 3D-printed multilayer wall system: An experimental and numerical analysis19.07 MBAdobe PDFVer/Abrir


Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.