Utilize este identificador para referenciar este registo: https://hdl.handle.net/10216/151179
Registo completo
Campo DCValorIdioma
dc.creatorM. Ishtiyak
dc.creatorA. Sarkar
dc.creatorTiago Ferradosa
dc.creatorPaulo Rosa Santos
dc.creatorFrancisco Taveira Pinto
dc.creatorRui Figueiredo
dc.creatorXavier Romão
dc.date.accessioned2024-02-20T00:16:33Z-
dc.date.available2024-02-20T00:16:33Z-
dc.date.issued2023-06
dc.identifier.issn1741-7597
dc.identifier.othersigarra:634764
dc.identifier.urihttps://hdl.handle.net/10216/151179-
dc.description.abstractMonopiles are the Industry's first choice today to support an Offshore Wind Turbine (OWT) due to the complexities associated with fabrication, transportation, and installation of various foundation solutions. These are, however, considered suitable for water depths up to around 30 to 35 m, beyond which these become massive and complex to handle. Increasing monopiles' application range without making them too large by adopting some suitable means may significantly impact the rapid growth of OWTs at intermediate water depths (& SIM;50 m), where existing solutions like jackets or concrete gravity foundations involve large capital expenditure. In this paper, a novel approach of utilizing pre-tensioned tethers along with a 6.0 m diameter monopile has been explored for 50 m water depth. Under extreme load case, the stress ratio has been noted to be reduced from 1.17 to 0.44 when the pre-tensioned tethers are used. Similarly, it is found that by adjusting parameters associated with the proposed concept, the fatigue damage can be brought down from a very high value to 0.63 or less. Thus the results show that the proposed approach can open new avenue to bring competitiveness to the cost of offshore wind energy at the intermediate water depths.
dc.language.isoeng
dc.rightsrestrictedAccess
dc.subjectCiências Tecnológicas, Ciências da engenharia e tecnologias
dc.subjectTechnological sciences, Engineering and technology
dc.titlePerformance of a novel concept of a monopile adapted with pre-tensioned tethers for intermediate waters
dc.typeArtigo em Revista Científica Internacional
dc.contributor.uportoFaculdade de Engenharia
dc.identifier.doi10.1680/jmaen.2023.001
dc.identifier.authenticusP-00Y-QYW
dc.subject.fosCiências da engenharia e tecnologias
dc.subject.fosEngineering and technology
Aparece nas coleções:FEUP - Artigo em Revista Científica Internacional

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
634764.pdf
  Restricted Access
1.66 MBAdobe PDFVer/Abrir


Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.