Please use this identifier to cite or link to this item: https://hdl.handle.net/10216/122660
Full metadata record
DC FieldValueLanguage
dc.creatorP. Pereira
dc.creatorM. Almeida
dc.creatorJ. Pereira
dc.creatorN. T. Paiva
dc.creatorJ. M. Ferra
dc.creatorJorge Martins
dc.creatorLuísa Carvalho
dc.creatorFernão D. Magalhães
dc.date.accessioned2022-09-15T20:50:24Z-
dc.date.available2022-09-15T20:50:24Z-
dc.date.issued2019
dc.identifier.issn0143-7496
dc.identifier.othersigarra:357003
dc.identifier.urihttps://hdl.handle.net/10216/122660-
dc.description.abstractDuring storage, the structure of urea-formaldehyde (UF) resins suffers modifications due to reactions between monomers, oligomers, polymer and free formaldehyde, leading to increase in viscosity and decrease in pH. Eventually, viscosity reaches a value that renders the resin unusable, and it must be disposed off. This aging process is accelerated if storage temperature increases. The aim of this work is to obtain UF resins with long storage stability, even when exposed to relatively high temperatures, such as 40 degrees C. The main strategy adopted was the addition of a chain growth blocker, caprolactam. This monofunctional compound reacts with end groups, blocking them and therefore reducing the polymer's reactivity. In addition, a weak base was added to adjust the pH value, instead of the traditional strong base, sodium hydroxide, therefore hindering the Cannizzaro reaction. The storage stability of UF resins with formaldehyde to urea molar ratio of 1.6-2.0 was monitored by pH and viscosity measurements. Caprolactam was added in different amounts and at different reaction stages. It was found that 10% addition at the beginning of condensation led to the best results, giving a much higher storage stability at 40 degrees C (2 months when compared to 4 days for a commercial UF resin with low F/U molar ratio). As expected, the resin reactivity decreased with caprolactam addition, demanding for longer pressing times for wood-based panel manufacture. These verified the internal bond strength specification for EN 312 - P2 standard class. Formaldehyde content in the panels was above the El class limit when fresh or one month old modified resins were used, implying addition of formaldehyde scavengers. The resin stored for 2 months allowed producing panels within El limit. These preliminary results demonstrate the concept that addition of an end-group blocker during UF synthesis is an effective strategy for improving storage stability, encouraging future work on alternative compounds and synthesis conditions optimization.
dc.language.isoeng
dc.relationinfo:eu-repo/grantAgreement/FCT - Fundação para a Ciência e a Tecnologia/Programa de Financiamento Plurianual de Unidades de I&D/UID/EQU/00511/2019 /Projeto Estratégico do LEPABE - Laboratório de Engenharia de Processos, Ambiente, Biotecnologia e Energia/LEPABE
dc.relationinfo:eu-repo/grantAgreement/Agência Nacional de Inovação S.A./P2020|COMPETE - Projetos em Copromoção/POCI-01-0247-FEDER-003489/2GAR - Resinas Amino de segunda Geração/2GAR
dc.rightsrestrictedAccess
dc.titleImprovement of storage stability of UF resins by adding caprolactam
dc.typeArtigo em Revista Científica Internacional
dc.contributor.uportoFaculdade de Engenharia
dc.identifier.doi10.1016/j.ijadhadh.2019.04.005
dc.identifier.authenticusP-00Q-M3K
Appears in Collections:FEUP - Artigo em Revista Científica Internacional

Files in This Item:
File Description SizeFormat 
357003.pdf
  Restricted Access
635.23 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.