Please use this identifier to cite or link to this item: https://hdl.handle.net/10216/116070
Full metadata record
DC FieldValueLanguage
dc.creatorCláudio Rocha
dc.creatorMiguel A. Soria
dc.creatorLuís M. Madeira
dc.date.accessioned2022-09-27T23:15:22Z-
dc.date.available2022-09-27T23:15:22Z-
dc.date.issued2019
dc.identifier.issn1743-9671
dc.identifier.othersigarra:287864
dc.identifier.urihttps://hdl.handle.net/10216/116070-
dc.description.abstractA thermodynamic analysis of the steam reforming of olive oil mill wastewater (OMW) was performed in a traditional reactor (TR). The equilibrium compositions are calculated employing the Gibbs free energy minimization method (using Aspen Plus V8.8 (R) software). The simulations were performed at different temperatures (300-1000 degrees C), different pressures (1-20 bar) and different compositions of the OMW, which might differ considerably. It was found that the H-2 yield increases with the temperature up to a maximum value, while it continuously decreases with the pressure. In opposition, the water content in the feed increases the H-2 yield, thus providing opportunity to take advantage of the waste aqueous matrix. The optimum operating conditions for several OMW compositions, corresponding to either real or simulated effluents from different areas, were determined; this is a very important aspect that allows to assess, in advance, the potential of such waste valorization into green hydrogen production. Moreover, it was found a good agreement between the maximum H-2 yield obtained for each wastewater and the ones predicted based on their compositions. Coke formation was also accounted, which increases when decreasing either temperature or water content in the feed. However, for a water content in the feed greater than 60 wt.% (which is the case of most OMWs) there is no coke formation whatever the temperature and pressure (within the ranges used in this study) and for all the effluent compositions considered.
dc.language.isoeng
dc.relationinfo:eu-repo/grantAgreement/Comissão de Coordenação e Desenvolvimento Regional do Norte/P2020|Norte2020-Projetos Integrados ICDT/NORTE-01-0145-FEDER-000005/LEPABE-2-ECO-INNOVATION/LEPABE-2-ECO-INNOVATION
dc.rightsrestrictedAccess
dc.titleThermodynamic analysis of olive oil mill wastewater steam reforming
dc.typeArtigo em Revista Científica Internacional
dc.contributor.uportoFaculdade de Engenharia
dc.identifier.doi10.1016/j.joei.2018.06.017
dc.identifier.authenticusP-00P-MFH
Appears in Collections:FEUP - Artigo em Revista Científica Internacional

Files in This Item:
File Description SizeFormat 
287864.pdf
  Restricted Access
1.57 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.