Utilize este identificador para referenciar este registo: https://hdl.handle.net/10216/107078
Registo completo
Campo DCValorIdioma
dc.creatorJ. Carneiro
dc.creatorErica Doutel
dc.creatorJoão B. L. M. Campos
dc.creatorJoão M. Miranda
dc.date.accessioned2019-11-14T00:15:58Z-
dc.date.available2019-11-14T00:15:58Z-
dc.date.issued2015
dc.identifier.othersigarra:210561
dc.identifier.urihttps://hdl.handle.net/10216/107078-
dc.description.abstractIn vitro experiments of blood flow are usually performed with blood analogue fluids due to ethical and practical considerations. The ideal analogue must match the rheology of blood in multiple scales. Ideally, the blood analogue fluid should be a suspension of transparent particles with similar properties to red blood cells. PDMS particles are an interesting candidate because they are transparent, have a low refractive index and can be produced through polymerization by heating. Here we present a study to produce PDMS microparticles, to be used in biomimetic fluids, by droplet microfluidics. A microfluidic flow focusing device was employed to produce the droplets. A polymeric fluid (PDMS) was squeezed by two counter-flowing water streams (with 2% of SDS). The flow rate of the disperse phase (Qdis) was 1 μl min-1 and that of the continuous phase (Qcont) 5 μ min-1. Both liquids were forced to flow through a narrow slit (25 μm × 100 μm) located downstream the channels where PDMS stream breaks into droplets. In these conditions, the device operated in the jetting regime, forming polydispersed droplets. Monodispersed microparticles were also obtained in the dripping regime. The droplets were then cured thermally to form microparticles. The process of droplet formation was filmed with a high-speed camera and the movies were analyzed to relate the flow pattern to particle size distribution.
dc.language.isopor
dc.relationinfo:eu-repo/grantAgreement/Autoriadade de Gestão do Programa Operacional Regional do Norte/Programas Integrados de IC&DT/NORTE-07-0124-FEDER-000025/(Bio) Chemical Engineering: Multi-Scale Approaches for Sustainable Environment and Health/LEPAE/CEFT - RL2
dc.rightsrestrictedAccess
dc.titleVisualization of PDMS microparticles formation for biomimetic fluids
dc.typeArtigo em Revista Científica Internacional
dc.contributor.uportoFaculdade de Engenharia
dc.identifier.doi10.2174/1876402908666160106000558
dc.identifier.authenticusP-00K-7GR
Aparece nas coleções:FEUP - Artigo em Revista Científica Internacional

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
210561.pdf
  Restricted Access
artigo original publicado1.47 MBAdobe PDFVer/Abrir


Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.